Blood Pressure Notes; What Are Systolic Pressure And Diastolic Pressure; What Is The Standard Blood Pressure Classification - Welch Allyn RPM-BP100 Mode D'emploi

10 Informations de présentation
Symbole Description
Pulsations
Battement cardiaque
irrégulier
Battement cardiaque
Indicateur des piles
Indicateur de niveau faible
des piles
Erreur de transmission des
données
Indicateur de déplacement
Hors plage.
Tensiomètre de monitorage à distance RPM-BP100 de Welch Allyn
Explication
Pulsation/mn
Battement cardiaque irrégulier
Le moniteur détecte un battement de cœur pendant la
mesure.
Indication de la charge en cours des piles
Indication de la charge en cours des piles
Erreur de transmission des données
Le fait de se déplacer peut entraîner une mesure
imprécise.
Soit SYS > 230 mmHg ou DIA > 130 mmHg. Le symbole
peut apparaître dans la zone SYS ou DIA de l'écran.
Priorité de l'alarme = Bas
Directions for use
Segments
5
6
7
8
If you press the Power/Standby button to stop the measurement during the
measurement, the SYS and DIA numbers are cleared and replaced with dotted lines.
CAUTION The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other record numbers
are increased by one digit (for example, 2 becomes 3, and so on), and the
oldest record (99) is dropped from the list.

Blood pressure notes

Activities that could cause inaccurate measurements
• Taking a measurement within 1 hour of eating or drinking
• Taking a measurement within 20 minutes of taking a bath
• Being in a very cold environment
• Taking a measurement immediately after drinking tea, coffee, or smoking
• Taking a measurement while talking or moving your fingers
• Taking a measurement when you need to urinate
What you need to pay attention to when you measure your blood
pressure at home
• If the cuff is attached properly.
• If the cuff is too tight or too loose.
• If the cuff is attached on the upper arm.
• If you feel anxious, take 2–3 deep breaths before beginning. Relax for 4–5 minutes
until you calm down. This will result in a more accurate measurement.

What are systolic pressure and diastolic pressure?

When ventricles contract and pump blood out of your heart, the blood pressure reaches
its maximum value in the cycle, which is called systolic pressure. When the ventricles
relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic
pressure.

What is the standard blood pressure classification?

The chart below is the standard blood pressure classification published by American
Heart Association (AHA).
Use the monitor 15
Pressure
>=140
>=160
>=180
>=200