Use The Monitor; Startup; Blood Pressure Items - Welch Allyn RPM-BP100 Mode D'emploi

12 Informations de présentation Tensiomètre de monitorage à distance RPM-BP100 de Welch Allyn

Use the monitor

Startup

The patient is an intended operator of the device. The patient can measure, transmit
data, change the battery under normal circumstances, and maintain the device and its
accessories according to the user manual.
Press the Power button to turn the device on or off. Upon each power up, the display
lights up and displays "888."
If a system error is detected, the device displays a system error message beginning with
the letter "E" and followed by a system fault code to assist service and engineers in
diagnosing the problem.
Pair a communication hub with the monitor
With advanced Bluetooth 4.0 Technology applied, a communication hub is capable of
receiving your personal health data. Contact your Remote Patient Monitoring Solution
provider for connectivity instructions and troubleshooting.
1. Confirm that both the mobile or portable equipment and the monitor are powered
on.
Note Bluetooth wireless connectivity is only available for devices
which support Bluetooth 4.0 technology.
2. Press and hold the Power/Standby button for 2 seconds.
The Bluetooth pairing sequence is activated. The dotted line surrounding the
Bluetooth symbol flashes while discovering the monitor.
If successful, a steady symbol surrounded by a dotted line appears on the LCD
screen. If unsuccessful, the

Blood pressure items

Identify and have available the blood pressure monitor, the blood pressure cuff, and the
blood pressure air hose.
appears.
13