Replacement Of Traction Tyres - Roco BR 03 0058-2 Série Manuel

Only apply small oil droplets onto the positions
as marked in the lubrication plan. We recommend
ROCO oiler Art. No. 10906.
Fig. 2
In order to lubricate the transmission parts (gear
wheel, screw), we recommend using ROCO spe-
cial grease 10905. If lubricated, do not oil these
parts.

▪ Replacement of traction tyres

Pay attention to the original position of the wheel contacts prior to removing the axles.
Remove boogie blind. Remove the traction tyres using a needle or a thin screwdriver. When applying the
new traction tyres, please ensure that they do not rotate.
24
24
see fig. 1
Fig. 3
11
11