Établissement De L'emplacement De La Plaque Murale Sous Votre Armoire - Beko MWOTR 30200 CSS Manuel D'utilisation

Installation
5
5.1.3 Établissement de l'emplacement
de la plaque murale sous votre armoire
Emplacement de la plaque—sous une armoire
à fond plat
NOTE:
READ IT IS VERY IMPOR
IN THE AND FOLLO TANT TO
BEFOR INSTAL LATION W THE DIREC
REAR E PROCE EDING INSTRU TIONS
WALL TEMPL WITH THIS CTIONS 3/8" TO EDGE
mounting This Rear Wall Template ATE.
outlet. plate and to locate serves to position 12"
1. Use a level the horizontal the bottom
accurately to check that the exhaust
2. Locate and mark . template is positioned
right side of the centerline at least one stud 4"
screw mounted It is important . on the left or
of the microwav firmly in to use at least one
locations e. Mark two additional a stud to support wood
3. Drill holes for the supplied toggle bolts. , evenly the weight Trim the
a stud, drill a 3/16" in the marked locations. spaced rear wall
that do toggle bolts. not line up with hole for wood screws. Where there is
a stud, drill 5/8" For holes
AT THIS DO NOT INSTALL holes for
4. Remove TIME. THE MOUNTIN
5. Review the template the Installation from the G PLATE
installation situation. Instruction rear wall.
book for your
Darle vuelta versión a la hoja
en Español. para consulta
r la
Locate
and mark
mountin g plate. holes to align with
IMPOR TANT: holes in
LOCAT the
THE CENTE E AT LEAST
RLINE. ONE STUD ON EITHER
MARK THE LOCAT SIDE OF
SPACE D TOGGL ION FOR
AREA. E BOLTS 2 ADDITI ONAL,
IN THE MOUNT EVENL Y
ING PLATE
Trim the rear wall
templa
te along the dotted
line.
Locate
mountin and mark holes to
g plate. align with
IMPOR TANT: holes in
LOCAT E AT LEAST
THE CENTE ONE STUD
MARK RLINE. ON EITHER
THE LOCAT
SPACE D TOGGL ION FOR
AREA. E BOLTS 2 ADDITI
IN THE MOUNT
C L
Tracez une ligne verticale sur le mur au centre de
l'espace de 30 po de large. Collez le gabarit pour
mur arrière sur le mur le long de la ligne centrale
et en touchant le bas de l'armoire.
Emplacement de la plaque—sous une armoire dotée d'un
rebord
NOTE :
READ IT IS VERY
AND FOLLO IMPOR TANT
IN THE INSTA W THE TO
BEFOR E PROC LLATIO N INSTR DIREC TIONS
REAR EEDIN UCTIO
WALL TEMP LATE. G WITH THIS NS 3/8" TO EDGE
This Rear Wall Template
mounting outlet. plate and serves to position 12"
1. Use to locate the horizonta the bottom
accurate a level to check l exhaust
2. Locate ly. that the template
right side and mark at least is positione d
of the centerline one stud on the left 4"
screw mounted It is importan . or
of the microwav firmly in t to use at least
locations e. Mark a stud to support one wood
3. Drill holes for the supplied two additiona l, evenly the weight Trim the
a stud, in the marked toggle bolts. spaced rear wall
that do drill a 3/16" hole for locations . Where
toggle bolts. not line up with a stud, wood screws. there is
drill 5/8" holes for For holes
AT THIS DO NOT INSTALL
4. Remove TIME. THE MOUNTI NG PLATE
5. Review the template from the
installatio the Installatio n Instructio rear wall.
n situation. n book for your
Darle vuelta
versión a la hoja
en Español . para consulta r la
Locate
and mark
mount ing plate. holes to align with
IMPOR holes in
LOCAT TANT: the
E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
THE LOCAT R SIDE
SPACE D TOGG ION FOR OF
AREA. LE BOLTS 2 ADDIT IONAL
IN THE , EVENL
MOUN TING PLATE Y
Trim the rear wall
templa
te along
the dotted
line.
Locate and mark
mount ing holes to
IMPOR plate. align with
TANT:
LOCAT E AT LEAST
THE CENTE
RLINE ONE STUD
MARK THE LOCA .
SPACE TION FOR
D TOGG LE BOLTS 2 ADDIT
AREA. IN THE
C L
Tracez une ligne verticale sur le mur au centre de
l'espace de 30 po de large.
Collez le gabarit pour mur arrière sur le mur le long de la
ligne centrale et en touchant le cadre de l'armoire inférieure.
46 / 63 FR
templa
te along
the dotted line.
16-1/2
the
SIDE OF
ONAL,
EVENL Y
ING PLATE
templa te along
the dotted
line.
holes in
the
ON EITHE R SIDE
OF
IONAL , EVENL
MOUN Y
TING PLATE
À 33 po de la surface de cuisson
Four à micro-ondes à convection à hotte intégrée / Manuel d'installation
Emplacement de la plaque—sous une armoire
dont le fond est doté d'un surplomb avant
NOTE : IT IS
READ VERY
IN THE AND FOLLO IMPOR TANT
BEFO INSTA LLATIO W THE DIREC TO
REAR RE PROC N INSTR TIONS
WALL EEDIN G WITH UCTIO NS
This Rear TEMP LATE. THIS 3/8" TO EDGE
mounting plate and Wall Template serves
outlet. to locate to position 12"
1. Use a level the horizonta l exhaust the bottom
accurate ly. to check that the
2. Locate and mark template is positione
right side of the centerlin at least one stud d 4"
screw mounted It is importan e. on the left or
of the microwa firmly in t to use at least
locations ve. Mark a stud to support one wood
3. Drill for the supplied two additiona the weight
a stud, holes in the marked toggle bolts. l, evenly spaced Trim the
that do drill a 3/16" hole for locations . Where rear wall
toggle bolts. not line up with a stud, wood screws. there is templa
DO NOT drill 5/8" holes for For holes te along the dotted
AT THIS TIME. INSTALL
4. Remove the template THE MOUNTI NG PLATE
5. Review the Installatio from the
installatio n situation n Instructio rear wall.
. n book for your
Darle vuelta
versión en Españo a la hoja para consulta
l. r la
Locate
and mark
mount ing plate. holes to
IMPOR align with holes in
TANT: the
LOCA TE AT
THE CENT LEAST ONE STUD
MARK ERLIN E. ON EITHE
THE LOCA R SIDE
SPAC ED TOGG TION FOR OF
AREA LE BOLTS 2 ADDIT IONAL
. IN THE , EVEN
MOUN TING PLATE LY
Trim the
rear wall
templa
te along the dotted
line.
Locate and mark
mount holes to
ing plate. align with
IMPOR TANT: holes in the
LOCA TE AT
THE CENT LEAST
ERLIN ONE STUD
MARK THE LOCA E. ON EITHE
SPAC TION FOR R SIDE OF
AREA ED TOGG LE BOLTS 2 ADDIT
. IN THE IONAL , EVEN
MOUN LY
TING PL
Vos armoires peuvent être dotées de garnitures
décoratives qui entravent l'installation du micro-
ondes. Enlevez l' é lément décoratif pour installer
convenablement le four à micro-ondes et pour
vous assurer qu'il est à niveau
Le four à micro-ondes doit être à ni-
veau.
Utilisez un niveau pour vous assurer que le fond de
l' a rmoire est à niveau.
Si les armoires sont dotées uniquement d' u n re-
bord avant, sans rebord sur les côtés ou à l' a rrière,
installez la plaque de montage plus bas, à la même
distance que le rebord avant de l' a rmoire. Ainsi, le
four sera à niveau.
1. Mesurez l' é paisseur intérieure du rebord avant
de l' a rmoire.
2. Tracez une ligne horizontale sur le mur arrière,
en dessous du fond de l' a rmoire, à une distance
égale à l' é paisseur intérieure du rebord avant de
l' a rmoire.
3. Pour l'installation sous une armoire dotée
uniquement d' u n rebord avant, alignez les
languettes de montage avec cette ligne
horizontale, sans toucher le fond de l' a rmoire,
tel que décrit dans le sous-titre 5.1.4.
Tracez une ligne sur le mur
arrière correspondant à la
profondeur du surplomb
avant.
line.
NOTE: IT IS VERY
IN THE READ AND FOLLOW IMPORTAN T TO
REAR BEFORE INSTALLAT PROCEEDI THE DIRECTION ION INSTRUCTI S
This Rear WALL TEMPLATE NG WITH THIS ONS 3/8" TO EDGE
outlet. mounting Wall Template plate and to locate serves to position . 12"
1. Use a level accurately. to check that the the horizontal the bottom exhaust
2. Locate right side and mark of the centerline. at least template one stud is positioned
screw mounted It is important to use on the left or 4"
of the microwave. locations for the firmly in Mark two a stud to support at least additional, the weight one wood
3. Drill a stud, holes in drill a 3/16" the marked supplied toggle locations. bolts. evenly spaced Trim the
that do toggle bolts. not line hole for up with a stud, wood screws. drill 5/8" Where For holes there is rear wall template along
4. Remove AT THIS DO NOT TIME. INSTALL THE MOUNTING holes for the dotted line.
5. Review installation the Installation the template from the PLATE
situation. Instruction book for rear wall. your
Darle vuelta
versión en Español. a la hoja para consultar la
Locate and mark
mounting plate. holes to align with
IMPORTAN LOCATE T: holes in the
THE CENTERLIN AT LEAST ONE STUD
SPACED MARK THE LOCATION E. ON EITHER SIDE OF
AREA. TOGGLE BOLTS FOR 2 ADDITIONA
IN THE MOUNTING L, EVENLY PLATE
Trim the rear wall
template along the dotted
line.
Locate and mark
mounting IMPORTAN plate. holes to align with holes
LOCATE AT LEAST T: in the
MARK THE CENTERLIN ONE STUD ON EITHER
SPACED THE LOCATION E. SIDE OF
AREA. TOGGLE BOLTS FOR 2 IN THE ADDITIONA L, EVENLY
MOUNTING PLATE
C L
À 33 po de la surface de cuisson