Commissioning, Operation - WIKA TFS135 Mode D'emploi

4. Transport ... / 5. Commissioning, operation
Store the bimetal temperature switch in its original packaging in
a location that fulfils the conditions listed above. If the original
packaging is not available, pack and store the instrument as
EN
described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in
the packaging.
3. If stored for a prolonged period of time (more than 30 days), place
a bag containing a desiccant inside the packaging.

5. Commissioning, operation

12
WARNING!
Physical injuries and damage to property and the
environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen,
acetylene, flammable or toxic substances), harmful media
(e.g. corrosive, toxic, carcinogenic, radioactive), and
also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and
the environment.
Should a failure occur, aggressive media with extremely
high temperature and under high pressure or vacuum may
be present at the instrument.
▶
For these media, in addition to all standard regulations,
the appropriate existing codes or regulations must also
be followed.
CAUTION!
Damage to the instrument
When working on open electric circuits (printed circuit
boards) there is a risk of damaging sensitive electronic
components through electrostatic discharge.
▶
The correct use of grounded working surfaces and
personal armbands is required.
WIKA operating instructions model TFS135