Dometic SKYSOL POWERED ROOFBLIND Instructions De Montage page 23

Powered Roofblind
Key to circuit diagrams:
Item
1
2
3
4
5
6
7
8
9
10
11
bk
rd
wh
gy
ye
7.2 Frame fitting (pre-assembled version)
7.2.1 Frame fitting
A
NOTICE! Risk of damage
• Use packing material where required (fig. 3, page 4). The side tracks must
be perpendicular to the head rail.
• Use screws and plugs suitable for the wall construction to fix the frame to
the recess. Pre-drill at the marked points.The heads of screws may be no
larger than 6.0 mm in diameter.
• Ensure not to drill through the wall.
• Ensure not to damage the channel in the side tracks.
• Ensure not to leave screws or other debris inside the side tracks as this can
jam the shoes in the tracks.
Proceed as shown (fig. 4, page 4):
➤ Align the blind with the window cut-out and mark where the holes are to be
drilled for the frame.
➤ Fix the frame with the screws to the ceiling (2.).
EN
Description
Fused 12 Vg or 24 Vg supply
(fuse rating: 3 A for 12 Vg, 2 A for 24 Vg)
Head rail motor
Second head rail motor (only for DM versions)
Second head rail motor (only for D2 and S2 versions)
Customer supplied switch (DPDT (double pole, double throw),
latching or momentary, 12/24 Vg, 3 A)
AP receiver
Automation system dry contact component (optional)
Somfy Centralis DC IB control unit
Center stop function
UP function
DOWN function
black
red
white
gray
yellow
Installation
23