Description And Operation; Warning - Caution - Vortice NORDIK EVOLUTION REVERSIBILE Notice D'emploi Et D'entretien

DESCRIPTION AND OPERATION

The product you have purchased is a reversible
ceiling fan. You can also install an additional light kit
with two energy saving bulbs of maximum 15 W each
with Edison E27 fitting. The other kit uses a

WARNING - CAUTION

!
Warning:
• Do not use this appliance for functions other than
those described in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified technician
or Vortice*. Do not leave packaging within the
reach of children or infirm persons.
• Store the appliance out of reach of children and
infirm persons after disconnecting it from the power
supply.
• Certain fundamental rules must be observed when
using any electrical appliance: a) Never touch
electrical appliances with wet or damp hands.
!
Caution:
this symbol indicates precautions that must be taken to avoid damaging the appliance.
• Do not make modifications of any kind to this
appliance.
• Do not expose this appliance to the weather (rain,
sun, etc.)
• Install the appliance at an adequate distance from
walls and other objects, etc..
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance
but contact Vortice* immediately.
• If the appliance does not function correctly or
develops a fault, contact Vortice* immediately and
ensure that only original Vortice spares are used for
any repairs.
• Should the appliance be dropped or suffer a heavy
blow, have it checked by Vortice* immediately.
• This appliance must be installed by a professionally
qualified electrician.
• Ensure that the electrical system to which the
*(or an authorised Service Centre if you are outside the UK-Ireland territory)
this symbol indicates precautions that must be taken to avoid injury
maximum 150 W incandescent light bulb with Edison
E27 fitting. An infrared remote control is also
available.
b) Never touch electrical appliances while barefoot.
c) Never allow children or infirm persons to operate
appliances unattended.
• Do not operate the appliance where inflammable
vapours are present (alcohol, insecticides, petrol,
etc.).
• To conform to applicable standards, the bottom
edges of the fan blades must be at a height of at
least 2.30 metres or more from the floor (fig.1).
• Any modifications made to the standard factory
fittings automatically invalidates the warranty and
absolves the manufacturer from all liability.
appliance is connected conforms to applicable
standards.
• The appliance must be connected to an efficient
earthing system in accordance with applicable
electrical safety standards. If in doubt, ask a
qualified electrician to check your system.
• The electrical power supply/socket to which the
appliance is to be connected must be able to
provide the maximum electrical power required by
the appliance. If it cannot do so, arrange for a
professionally qualified electrician to make the
necessary modifications.
• Use a multi-polar switch with minimum contact gaps
of 3 mm to install the appliance.
• Switch off the appliance at the installation's main
switch: a) if the appliance does not function
correctly; b) before cleaning the outside of the
appliance, c) if the appliance is not to be used for
any length of time.
ENGLISH
5