Basic Operation - Sharp AY-XPC7JHR Mode D'emploi

BASIC OPERATION

1
2
2
5
3
3
1
4
4
5
GB-6
Press the MODE button to select the
operation mode.
AUTO HEAT COOL
Press the ON/OFF button to start
operation.
• The red OPERATION lamp (
will light.
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed in 1°C incre-
ments within the range of 2°C higher to 2°C
lower from the temperature automatically deter-
mined by the air conditioner.
(Example: 1°C higher)
(Example: 2°C lower)
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp (
will turn off.
DRY
) on the unit
HIGH
) on the unit