Factory Setting; Setting Menu Parameters - IKA Tube Mill control Mode D'emploi

 After the system check screen, the working screen appears
and the instrument is ready for operation.
The device is supplied with following factory setting:
Menu Settings:
mode A
max rpm 25000
timer max 03:00
language english
Working Setting:
target rpm 5000
timer sec off
int sec off
• Menu system
Maximum rotation speed (max rpm) ..............................................
Timer maximum value (timer max) .................................................
Operation mode
Menu
Language
Note: Above figures show specified values corresponding
to the default settings at delivery.

Factory setting

Resetting parameters to factory setting:
To reset the parameters to the factory settings, proceed
as following:
• Switch off the instrument with the mains switch (A).
• Press down the "Menu/Back" key (G) and "Timer" key
(E) simultaneously and re-start the instrument again.
• The unit is now reset to the factory settings.

Setting menu parameters

mode A ..................................
mode B ...................................
program saved P1.....................
...
program saved P9.....................
english ...................................
中文 .....................................
deutsch .................................
français ..................................
español ..................................
italiano ..................................
한국어...................................
日本語...................................
Factory setting
25000 rpm
03:00 [mm:ss]
activated
-
-
-
-
activated
-
-
-
-
-
-
-
18