Ec Declaration Of Conformity; Explication Of Warning Symbols - IKA Tube Mill control Mode D'emploi

Source language: German
EC-Declaration of conformity

Explication of warning symbols

Safety instructions
Correct use
Unpacking
Useful information
Interfaces and outputs
Commissioning
Switching on the instrument
Factory setting
Setting menu parameters
Setting working parameters
Warning messages
Error codes
Using the coupling extractor
Maintenance and cleaning
Accessories
Technical data
Warranty
We declare under our sole responsibility that this product corresponds to the regulations 2004/108/EC, 2006/108/EC and
2011/65/EU and conforms with the standards or standardized documents: EN 61010-1, EN 6010-2-051, EN 61326-1,
EN ISO 12100 and EN 60204-1.
General hazard
This symbol identifies information that is of vital importance for protecting your health
DANGER
and safety. Disregarding this information may lead to health impairment and injuries.
This symbol identifies information that is of importance for the technically correct func-
WARNING
tioning of the system. Disregarding this information can result in damage to the instrument or
to system components.
This symbol indicates information which is important for proper use and ensuring that the
CAUTION
operations of the instrument are performed efficiently and for using the instrument.
Failure to observe this information may result in inaccurate results.
Danger - Risk of hand injury.
DANGER
Danger - Risk of injury by high temperature.
DANGER
Contents
EC-Declaration of conformity
Explication of warning symbols
EN
Page
13
13
14
14
15
15
16
17
17
18
18
19
20
20
21
21
21
22
22
13