NSK Ti-Max X10l Manuel D'utilisation page 16

Chuck cleaning (X20L / X20 / X85L / X85 / X95L / X95)
Clean the Push Button chuck once a week.
1) Mount the Tip Nozzle onto the spray can port.
2) Lubricate the chuck directly where the bur is inserted (Fig. 10).
3) Lubricate handpiece by using NSK PANA SPRAY Plus / PANA SPRAY (Fig. 7) or NSK automatic handpiece
cleaning and lubrication system.
CAUTION
• If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released during use.
14
Bur Insertion Hole
Tip Nozzle
Fig. 10