NSK Ti-Max X10l Manuel D'utilisation page 15

CAUTION
• If you wish to purge excessive oil from inside the handpiece, rotate the handpiece for approx 15 seconds without a bur. During the rotation, do
not depress the chuck release button, especially when using absorbent cloth to prevent oil from scattering. Depressing the push button during
rotation may damage the chuck mechanism.
NOTICE
• NSK recommends the use of "Spray Mist Absorber" (Y900084) to prevent oil mist expelling out of the handpiece head.
Fig. 8 Fig. 9
13