Connecting The Video Door Phone - Extel WEVP 2100 E Guide D'installation Et D'utilisation

Masquer les pouces Voir aussi pour WEVP 2100 E:
Table des Matières

Publicité

Connecting the video door phone

a.
1. Connect the following wires according to the wiring diagram
2. To connect the camera, only 6 wires are necessary for all the functions:
ring tone, video image, door phone and door-opener control.
In any case, do not double the wires to increase size
Observe the polarity between the screen and the external camera (no polarity is to be observed for
the door-opener control)
Important :
mechanical memory like all EXTEL references
Anschluss des Visiophones
a.
1. Die Drähte gemäß dieses Verdrahtungsschemas anschließen.
2. Um die Kamera anzuschließen, werden nur 6 Drähte für alle Funktionen benötigt:
Klingel, Videobild, Sprechanlage und Türöffner.
In keinem Fall sollten die Drähte verdoppelt werden, um den
Querschnitt zu erhöhen.
Die Polaritäten zwischen dem Bildschirm und der Außenkamera respektieren.
(Für den Türöffner sind keine Polaritäten zu beachten)
Wichtig :
mechanischen Speicher verfügen, wie alle EXTEL Artikel.
Kamerarückseite befestigte Etikett.
14

Publicité

Table des Matières
loading

Table des Matières