Atlantic F125 DESIGN Mode D'emploi page 8

EN
Note: if you reduce the «Comfort» temperature setting below the «ECO» mode temperature, the latter
automatically drops by 1°С below the new «Comfort» setting.
«ECO» mode – Press the button
then shows the last temperature set for the «ECO» mode. To change the temperature, use the buttons
in the range of 6°С to the «Comfort» temperature - 1°С. After 5 seconds with no activity, the selected
temperature is automatically recorded, the display then shows the ambient temperature.
«PROG» mode – Press the button
then shows current mode settings following the «7d» program in use.
Day d1
Program P1
d1 – Monday, d2 – Tuesday ... d7 – Sunday.
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Ес Ес Ес Ес Ес Ес Со Со Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Со Со Со Со Ес Ес
Mode
Р1 is the preset program which is recommended for use while absent in the daytime («ECO» mode 22.00 -
06.00 and 08.00 - 18.00, «Comfort» mode 06.00 - 08.00 and 18.00 - 22.00).
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Ес Ес Ес Ес Ес Ес Со Со Ес Ес Ес Ес Со Со Ес Ес Ес Ес Со Со Со Со Ес Ес
Mode
Р2 is the preset program which is recommended for use while absent in the daytime, but coming at home during
lunch time («ECO» mode 22.00 - 06.00, 08.00 - 12.00 and 14.00 – 18.00, «Comfort» mode 06.00 - 08.00, 12.00
– 14.00 and 18.00 - 22.00).
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Ес Ес Ес Ес Ес Ес Ес Ес Со Со Со Со Со Со Со Со Со Со Со Со Со Со Ес Ес
Mode
Р3 is the preset program which is recommended for use while constantly present, for example on Saturday or
Sunday («ECO» mode 22.00 – 08.00, «Comfort» mode 08.00 -22.00).
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со Со
Mode
Р4 is the preset program which is recommended for continuous operation in «Comfort» mode.
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес
Mode
Р5 is the preset program which is recommended for continuous operation in «ECO» mode.
Time 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Ес Ес Ес Ес Ес Ес Со Со Ес Ес Ес Ес Ес Ес Ес Ес Ес Ес Со Со Со Со Ес Ес
Mode
Р6 is another preset program («ECO» mode 22.00 - 06.00 and 08.00 - 18.00, «Comfort» mode 06.00 - 08.00
and 18.00 – 22.00).
Note: to change dayly or weekly programming, please go to «Appliance settings», at the tab «Dayly
programming (P6)» and «Weekly programming (7d)». Before setting a programming, ensure you have set the
day of week and the time. If the day and the time are not set, go to «Appliance setup», at the tab «Day of week
and time».
TIMER mode – Press the button
shows the time after which the appliance goes off (by default 1 hour). To change the timer, use the buttons
and in the range from 1 to 8 hours (at 1-hour interval). After 5 seconds with no activity, the selected time is
automatically recorded, the display then shows the ambient temperature.
Note: pressing the button
APPLIANCE SETTINGS
Press the button repeatedly until the indicator below the pictogram
you select this parameter by pressing the button
menu «Settings», select the parameter «go» by using the buttons
8
repeatedly until the indicator below the pictogram
repeatedly until the indicator below the pictogram
Weekly programming «7d» by default (changeable)
d2 d3
P1 P2
Program «Р6» by default (changeable)
repeatedly until the indicator below the pictogram
, will stop the timer and the appliance switches to «Settings» parameter.
d4
P1
Program «Р1»
Program «Р2»
Program «Р3»
Program «Р4»
Program «Р5»
. The parameter «no» is blinking and if
, the appliance goes back to «Comfort» mode. To enter the
, and validate by pressing the button
lights up. The display
lights up. The display
d5 d6
P1 P3
. lights up. The display
and
d7
P3