Atlantic F125 DESIGN Mode D'emploi page 10

EN
MODEL SPECIFICATIONS
Rated heat output
Minimum heat output
Long-term maximum heat output
At the maximum heat output
At the minimum heat output
In stand-by mode
Electronic room temperature control and weekly programmer
Room temperature control with user presence sensor
Room temperature control with open window sensor
Remote control option
Adaptive activation control
Activation duration limit
Black globe sensor
CONTACTS
WARRANTY
(This certificate should only be produced if you are making a complaint)
- This warranty is applicable for 2 years from the date of installation or purchase and is valid for no more than
30 months from the date of manufacture in the absence of additional supporting documents
- The warranty covers the replacement or supply of parts in return for those found defective and does not provide
for any compensation for damages.
- Labor costs, travel and transportation are under responsibility of the user
- Damage associated with improper installation, power supply network that does not meet the standards,
improper use or failure to follow the instructions in the manual is not covered by the warranty.
- This certificate should be presented only when filing a complaint with the distributor or installer, along with the
seller's invoice.
- The provisions of these warranty conditions do not exclude the buyer's use of legal remedies against defects
and hidden deficiencies, which shall apply in accordance with Article 1641 and other articles of the Civil Code
- To apply for warranty service, please contact your distributor or installer. If necessary, you can also contact:
ATL International: Tel: (+33)146836001, 58 avenue du General Leclerc 92340 Bourg-la-Reine (FRANCE)
Type of Device
Serial Number
Name and address of the customer
10
Convectors CMG-PACK0, CMG-PACK0/M, CMG-PACK0/PR
Specification
Auxiliary power consumption
Specification
Type of heat output/room temperature control
Tel: (+33)146836001
58 avenue du General Leclerc
92340 Bourg-la-Reine (FRANCE)
KEEP THIS DOCUMENT IN A SAFE PLACE
INSTALLER'S STAMP
Heat output
Other control options
ATL International
Symbol Value
0,5 – 2,5
P nom
P min 0,0
P max, c 2,5
el max. 0,000
el min. 0,000
0,397
el sb
0,000
Unit Additional information
Yes
No
Yes
No
Yes
Yes
No
Unit
kW
kW
kW
kW
kW
W
kW
Timer