Dolmar RM-72.13 H Manuel D'utilisation page 65

Masquer les pouces Voir aussi pour RM-72.13 H:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
EN 18
MAX
MIN
With engine stopped, check its oil level which must be between the MIN and MAX
marks on the dipstick.
Refuel using a funnel, but do not completely fill the tank.
The tank's capacity is about 4 litres.
DANGER!
!
lated area with engine stopped. Always remember that petrol fumes are
inflammable. DO NOT TAKE FLAMES TO THE TANK MOUTH TO VERIFY ITS
CONTENTS AND DO NOT SMOKE WHEN REFUELLING.
IMPORTANT
In the event of accidental leaks, rinse immediately with water.
T
YRE PRESSURE
Having the correct tyre pressure is essen-
tial for keeping the cutting deck horizontal
and thus achieving uniform mowing.
Unscrew the valve protection cap and
connect the valves to a compressed air
line with a gauge.
Pressures are:
FRONT
1.5 bar
REAR
1.0 bar
Refuelling should be carried out in an open or well venti-
Do not drip petrol onto the plastic parts to avoid ruining them.
HOW TO USE THE MACHINE

Publicité

Table des Matières
loading

Table des Matières