Special Programs - Beko WMD 66160 Mode D'emploi

• Sport
This program is suitable for clothes that
are normally worn for a short time such as
sportswear. It is used to quickly wash a small
amount of cotton/synthetic blended clothes.
• Super
This program washes for a longer period at 40°C
and gives the same result as the "Cottons 60°C"
program, thus it saves energy. It is suitable for
clothes for which you cannot use the "Cottons
60°C" program.
• Mini
This program is used to quickly wash (30
minutes) a small amount of lightly soiled cotton
garments.
• Babycare
Increased hygiene is provided by a longer
heating period and an additional rinse cycle. It is
recommended for baby clothes and clothes worn
by allergic people.
• Hand Wash
You can wash your woolen/delicate clothes that
bear "not machine- washable" labels for which
hand wash is recommended on this program.
It washes the laundry with very tender washing
movements without damaging your clothes.
C
Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.

Special programs

For specific applications, you can select any of
the following programs:
• Rinse
This program is used when you want to rinse or
starch separately.
• Spin and Pump
This program is used to apply an additional spin
cycle for the laundry or to drain the water in the
machine.
Before starting this program, select the desired
spin sped and press "Start/Pause/Cancel"
button. Your machine drains the water after
spinning at the set spin speed.
If you only want to drain the water without
spinning your laundry, select "Spin and Pump"
program, and then select no spin function with
spin speed selection button. Press "Start/Pause/
Cancel" button.
A
You should use a lower spin speed for
delicate laundries.
Spin Speed selection
Whenever a new program is selected, the
maximum spin speed of the selected program is
displayed on the spin speed indicator.
To decrease the spin speed, press the "Spin"
button. Spin speed decreases gradually. Then,
rinse hold and no spin options are shown
respectively.
Rinse hold is shown with "
shown with " " symbols.
If you do not want to unload your clothes
" and no spin is
6 - EN
immediately after the program, you may use rinse
hold function in order to prevent your clothes
become wrinkled in anhydrous conditions. With
this function, your laundry is kept in the final
rinsing water. If you want to spin your laundry that
you left in water:
- Adjust the spin speed.
- Press "Start/Pause/Cancel" button.
Program resumes. Your machine drains the water
and spins your laundry.
You can use no spin function in order to drain the
water without spinning at the end of the program.