Special Programmes; Temperature Selection - Beko WTV 7512 DAR Manuel D'utilisation

Camisas (Shirts)
•
Use this programme to wash shirts made of
cotton, synthetic and synthetic blended fabrics
together. This programme ensures that your
clothes wrinkle less. When the quick wash function
is selected, the Pre-treatment algorithm is used.
• Apply the pre-treatment chemical directly onto
the clothes, or add it together with the detergent
when the machine starts to take in water from
the main wash compartment. This way, it will
take you much shorter to get the performance
you would normally get with a regular washing
cycle. Life of your shirts will be longer.
• Sport
Use this programme to wash outdoor/sports
clothes that contain cotton/synthetic mix, as
well as waterproof cloths like gore-tex. This
programme washes your laundry delicately
thanks to its special turning movements.
• Lencería (Lingerie)
You can use this programme to wash hand-
washable delicate clothes or women's underwear.
Small amount of laundry must be washed in a
laundry bag. Clasps and buttons must be done
up, and clothes with zip must be zipped.
• Plumíferos (Down Wear)
Use this programme to wash down coats,
vests, jackets etc. that bear a "machine-
washable" tag. Thanks to special spin profiles,
it is ensured that water reaches the air gaps
between feathers.

4.3.7 Special programmes

For specific applications, select any of the
following programmes.
• Spin+Drain
Use this programme to remove the water on
the clothes/in the machine.
Before selecting this programme, select the
desired spin speed and press Start/Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry at
the selected spin speed, and drain the water
coming off of the laundry.
15 / EN
If you only want to drain the water without
spinning the laundry, select the "Spin+Pump
programme, and use the Spin Speed
Adjustment button to select the No Spin
function. Press the Start/Pause button.
C
INFORMATION
• Use a lower spin speed for delicate laundries.

4.3.8 Temperature selection

Whenever a new programme is selected, the
recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
will decrease gradually. When the cold level is
selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached the heating
step, you can change the temperature without
switching the machine to Pause mode.
4.3.9 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. When the "No Spin" function
is selected, rinse level indicator lights will not be on.
Rinse hold
If you are not going to unload your clothes
immediately after the programme ends, you can use
rinse hold function to keep your laundry in the final
rinsing water in order to prevent them from getting
wrinkled when there is no water in the machine.
Press Start/Pause button after this process if you
want to drain the water without spinning your
laundry. Programme will resume where it left off,
drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained,
laundry will be spun and the programme will end.
C
INFORMATION
• If the programme has not reached the spin
step, you can change the spin speed without
switching the machine to Pause mode.
Washing Machine / User Manual