Special Programmes; Temperature Selection - Beko WTE 6501 B0 Mode D'emploi

• Mix 40
Use this programme to wash your cotton and
synthetic clothes together without sorting them.
• Shirts
Use this programme to wash the shirts made of
cotton, synthetic and synthetic blended fabrics
together.
• Sports
Use this programme to wash your garments that
are worn for a short time such as sportswear. It is
suitable to wash little amount of cotton / synthetic
blended garments.

4.6 Special programmes

For specific applications, select any of the following
programmes.
• Rinse
Use this programme when you want to rinse or
starch separately.
• Spin + Drain
Use this programme to apply an additional spin cycle
for your laundry or to drain the water in the machine.
Before selecting this programme, select the desired
spin speed and press Start / Pause button. First, the
machine will drain the water inside of it. Then, it will
spin the laundry with the set spin speed and drain
the water coming out of them.
If you wish to drain only the water without spinning
your laundry, select the Pump+Spin programme and
then select the No Spin function with the help of
Spin Speed Adjustment button. Press Start / Pause
button.
C
Use a lower spin speed for delicate laundries.

4.7 Temperature selection

Whenever a new programme is selected, the
maximum temperature for the selected programme
appears on the temperature indicator.
To decrease the temperature, press the Temperature
Adjustment button. Temperature will decrease
gradually.
C
If the programme has not reached the heating
step, you can change the temperature without
switching the machine to Pause mode.
15 / EN
4.8 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected programme
is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed
Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on the
display. See "Auxiliary function selection" section for
explanations of these options.
Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
C
If the programme has not reached the spinning
step, you can change the speed without
switching the machine to Pause mode.
Washing Machine / User's Manual