Starting The Programme - Beko WTE 6501 B0 Mode D'emploi

4.10 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
C
Some functions cannot be selected together. If
a second auxiliary function conflicting with the
first one is selected before starting the machine,
the function selected first will be canceled and
the second auxiliary function selection will
remain active. For example, if you want to select
Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will
remain active.
C An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C
Auxiliary Function buttons may vary according to
the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
C
Prewash without detergent is recommended for
tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and
also the number of rinsing steps for lightly soiled
laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in
the programme table.
17 / EN
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions. Set the desired time by pressing
the Delayed Start button. When the button is
pressed once, 3 hours delayed start is selected.
When the same button is pressed again, 6 hours
delay is selected, and when it is pressed for the third
time, 9 hours delayed start is selected. If you press
the Delayed Start button once again, Delayed Start
function will be canceled. Press Start / Pause button.
Previous delayed start time light turns off and next
delayed start time light turns on after every 3 hours.
At the end of the countdown, all delayed start lights
will turn off and the selected programme will start.
C
Additional laundry may be loaded during the
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is
pressed, the period will change in 3-hour increments
and the light of the selected delayed start time will
turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
Set the Delayed Start period to zero (all delayed start
period lights will turn off) or turn the Programme
Selection knob to any programme. Thus, Delayed
Start function will be canceled. The End/Cancel light
flashes continuously. Then, select the programme
you want to run again. Press Start / Pause button to
start the programme.

4.11 Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of
the programme will turn on.
C
If no programme is started or no key is pressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators
will turn off. Once the Programme Selection knob
is rotated or any button is pressed, indicator
lights and indicators will turn on again.
Washing Machine / User's Manual