Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press Start / Pause / Cancel button. ":" sign in the
middle of the delayed start time on the display stops
flashing. Pause symbol appears. Delayed Start
symbol flashes. Start symbol disappears. Set the
desired delayed start time by pressing the Delayed
Start + or - buttons. Press Start / Pause / Cancel
button. Delayed Start symbol illuminates steadily.
Pause symbol disappears. Start symbol appears.
":" sign in the middle of the delayed start time on the
display starts flashing.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
Press Start / Pause / Cancel button. ":" sign in the
middle of the delayed start time on the display stops
flashing. Start symbol disappears. Pause symbol
and Delayed Start symbol flashes. Decrease the
delayed start time by pressing the Delayed Start
- button. Programme duration appears after 30
minutes. Press Start / Pause / Cancel button to start
the programme.
Starting the programme
Press Start / Pause / Cancel button to start the
programme. Start symbol showing the startup of
the programme will turn on. Loading door is locked
and Door Locked symbol appears on the display.
The symbol of the step from which the programme
has started appears on the display (Prewash, Main
Wash, Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on the
display with a set of symbols.
Relevant symbol appears on the display at
the beginning of each programme step and all
symbols remain lit at the end of the programme.
The farthermost right symbol indicates the current
programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash
symbol appears on the display indicating that the
prewash step has started.
Main Wash
Main Wash symbol indicating that the main wash
step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has
started appears on the display.
Softener
Softener symbol indicating that the softener step has
started appears on the display.
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
If the machine does not pass to the spinning
C
step, Rinse Hold function might be active or the
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Door Locked symbol appears when the loading
door is locked. This symbol will flash until the loading
door becomes ready to open when programme
completes or the machine is paused. Do not force
to open the loading door in this step. Symbol
disappears when the door is ready to open. You can
open the door when the symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on
the display indicating that the machine is paused.
Start symbol disappears.
Changing the speed and temperature settings
for auxiliary functions
Depending on the step the programme has reached,
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch
the machine to pause mode. The programme
follow-up light of the relevant step during which the
machine was switched into the pause mode will
flash. Wait until the Loading Door can be opened.
Open the Loading Door and add or take out the
laundry. Close the Loading Door. Make changes in
auxiliary functions, temperature and speed settings
if necessary. Press Start / Pause / Cancel button to
start the machine.
The loading door will not open if the water
C
temperature in the machine is high or the water
level is above the door opening.
Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
You can switch on and off the machine with
C
On / Off button when the Child Lock is active.
When you switch on the machine again,
programme will resume from where it has
stopped.
To activate the Child Lock:
Press and hold 2
for 3 seconds. "Con" appears on the display.
Same phrase will appear on the display if you
C
press any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2
for 3 seconds. "COFF" appears on the display.
Do not forget to disable the child lock at the
C
end of the programme if it was enabled before.
Otherwise, machine will not allow to select a
new programme.
68
EN
and 4
Auxiliary Function buttons
nd
th
and 4
Auxiliary Function buttons
nd
th
Publicité
Table des Matières
