When Installing The Aerial Outside The Vehicle - Pioneer AVIC-HD3 Mode D'emploi

Masquer les pouces Voir aussi pour AVIC-HD3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 92
When installing the aerial outside the vehicle (on the body)
Put the GPS aerial in a position as level as possible, such as on the roof or boot lid. (The
GPS aerial is fastened with a magnet.)
GPS aerial
When routing the lead in from inside the boot
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Rubber packing
When routing the lead in from the top of the
door
Make a U-shaped loop in the lead
on the outside to prevent rainwater
from flowing along the lead into the
interior of the vehicle.
Clamps
Use clamps to secure
the lead where
necessary inside the
vehicle.
Waterproof pad
Make sure the waterproof pad
contacts the top of the rubber
packing.
Make a U-shaped loop in the
lead outside the rubber
packing to prevent rainwater
from flowing along the lead
into the interior of the vehicle.
26

Publicité

Table des Matières
loading

Table des Matières