Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher A150.670 Mode D'emploi

CAUTION! Danger of burning!
Protect your hands and face from possible fat splashes.
•
Do not use any hard or sharp object on the grill to prevent damage to the surface or
the operating elements.
•
Put the temperature control knob to „0" once you are finished grilling. Remove the
grilled food and pull the mains plug.
ATTENTION!
The device is equipped in the overheat protection system.
After turning the overheat protection system on, one shall turn the device off the
network socket (take out the plug!) and leave the grill to cool down. Push the
RESET buton located at the bottom of the device.
In case of frequent turning on of the overheat protection system within the short
intervals, it is recommended to contact the service.
•
If the device is not in use, remove it from the outlet (pull out the plug!)

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

Clean the device after each use.
o
Use soft cloth only and make sure you never use any kind of abrasive agents or pads,
o
which could scratch the surface.
Never use any aggressive cleaning agents or sprays.
o
- 25 -