Possible Malfunctions - Bartscher A150.670 Mode D'emploi

7. Possible Malfunctions

Problem
Grill plates do not get
warm although the
device has been
turned on and the red
temperature indicator
light is on.
The device has been
turned on, the tempe-
rature regulation knob
has been started, the
red temperature
indicator light is on,
but it is not possible
to regulate
temperature.
The red temperature
indicator light is not
on, although the device
is turned on and the
process of cooking
goes in usual way.
The green network
connection indicator
light is not on,
although the device is
turned on.
The above problems only serve for orientation and as examples. Should these or
similar problems occur, turn the device off immediately and discontinue using it.
For having the device checked and repaired, contact qualified service personnel or
the dealer immediately.
Cause
1. Temperature control
knob is defect.
2. At least one of the heater
cables is defect.
3. The overheat protection
system is on.
1. Temperature control
knob is defect.
1. Temperature indicator
light is damaged.
2. Abnormal or interrupted
power supply.
3. Fuse has blown.
Solution
1. Contact the retailer
2. Contact the retailer
3. Leave the grill to cool
down, push the RESET
button at the bottom of
the device.
1. Contact the retailer
1. Contact the retailer
1. Check the power
supply and the cable
for damage or faults.
2. Contact the retailer
- 27 -