Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher Panini Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device after each working day or also between the grilling processes,
when required.
WARNING!
Protect the device from the water penetration.
o Clean the housing, the handle and the outside of the top grill with a damp cloth.
Use a mild detergent in case the device is really dirty.
o Thicker deposits may be removed from the grill plates with use of attached cleaning
brush.
o Grill plates shall be washed inside with a soft dry or damp cloth.
o If the device is really dirty, lubricate the still warm grills with oil on the inside, leave to
soak for a few minutes and then clean off the grills with soft cloth.
o Clean the fat collecting tray with warm water and a mild detergent. Be careful when
cleaning the removable fat collecting tray. Always leave the fat to cool down before
disposing of it.
o Always use a soft cloth and never use coarse cleaning agents that could damage or
scratch the surfaces of the device.
o Never use aggressive cleaning agents or sprays.
o After cleaning dry and polish the surface with dry cloth.
- 26 -