Oase InScenio EGC Notice D'emploi page 28

Malfunction
The InScenio EGC Controller is
not reacting to commands.
The InScenio EGC Controller
switches at the wrong time.
28
Cause
WIFI on the smartphone/tablet
is deactivated.
Sources of interference between
the smartphone/tablet and In-
Scenio EGC Controller
Too large a distance between
the smartphone/tablet and the
InScenio EGC Controller
The power supply of the In-
Scenio EGC Controller is inter-
rupted.
The receiver in the InScenio EGC
Controller is defective.
The "OASE Easy Control" app is
outdated.
The operating system of the
smartphone/tablet is outdated.
The system time of the InScenio
EGC Controller does not corre-
spond to the actual time.
The data cable is interrupted.
Remedy
Activate WIFI on the
smartphone/tablet and es-
tablish a connection to the
InScenio EGC Controller.
• Reduce the distance be-
tween the
smartphone/tablet and
the InScenio EGC Con-
troller.
• Select a different loca-
tion for operating by
smartphone/tablet.
• Ensure that there are no
obstructions between
the InScenio EGC Con-
troller and
smartphone/tablet.
• For a direct WIFI connec-
tion (access point) be-
tween the InScenio EGC
Controller and
smartphone/tablet, se-
lect a different WIFI
channel.
• Reduce the distance, do
not exceed the max.
range of 80 m.
• Use an off-the-shelf re-
peater to increase the
range.
Establish power supply
• The green LED is lit.
• The green LED flashes
when the WIFI connec-
tion is established.
Contact the OASE service.
Install the latest version of
the "OASE Easy Control"
app on your
smartphone/tablet.
Update the operating sys-
tem.
Update the system time to
the time on the operating
device.
Check the EGC connections.