Oase InScenio EGC Notice D'emploi page 21

Commissioning/start-up
Proceed as follows for start-up:
1. Install the app "Easy Control" on your smartphone/tablet. (→ Installing the OASE
app "Easy Control" )
2. Connect the InScenio EGC Controller to the power supply. (→ Switching on the
unit)
3. Activate the WLAN connection in the settings of your smartphone/tablet, start the
app and follow the instructions.
Possible connection methods
For operation, the InScenio EGC Controller and the smartphone/tablet must be con-
nected via WLAN.
WLAN connection
Connecting the InScenio EGC Con-
troller and smartphone/tablet using
WPS via the WLAN network of the
WLAN router.
Directly connecting the InScenio EGC
Controller and smartphone/tablet
(Access-Point)
Manually connecting the the In-
Scenio EGC Controller and
smartphone/tablet via the WLAN
router of your home network.
Description
• The smartphone/tablet remains connected with the
WLAN network and can continue to access the inter-
net.
• EGC-capable units can be monitored and controlled
via the Cloud web portal.
• The InScenio EGC Controller and the smartphone/tab-
let are not connected with the WLAN network of the
WLAN router. Both units cannot access the internet.
• EGC-capable units cannot be monitored and con-
trolled via the Cloud web portal.
• The smartphone/tablet remains connected with the
WLAN network and can continue to access the inter-
net.
• EGC-capable units can be monitored and controlled
via the Cloud web portal.
EN
21