1.1 Purpose of this guide
This quick guide is designed for all those who want to quickly set up boss, with the following objectives:
•
display real-time device values, including alarms and events
•
display values recorded on one or more devices on a time graph
•
send notifi cations via SMS, e-mail in response to alarms/events or periodically
•
operate relays in the fi eld or set variables in response to alarms/events or periodically
•
print immediate reports or request periodical prints
•
program parametric devices
•
defi ne system and boss users
•
start guardian for increased supervisor security
•
customise the boss windows
Note: for further details on these procedures, see the boss online guide and use the search engine to
bring up pages with additional information on the required subject.
2.
2.1 Completing installation of boss
Unit installation must be correctly completed before starting setup.
1.
Follow the setup wizard and enter all the
information required.
2.
Carefully read technical leafl et to connect rightly:
- technical leafl et "boss cod. +0500092ML"
- ftechnical leafl et "boss mini cod. +0500108ML"
3.
Enter the password to access the system
1.
INTRODUCTION
COMPLETING INSTALLATION
5
ENG
+040000260 - 1.1 - 06.03.2019