Sharp LL-T15G4 Mode D'emploi page 24

Relevant signal timings (analog)
Display mode Hsync
640x480 31.5kHz
VESA
37.9kHz
37.5kHz
35.1kHz
800x600
37.9kHz
48.1kHz
46.9kHz
48.4kHz
1024x768
56.5kHz
60.0kHz
720x400 31.5kHz
US text
640x480 35.0kHz
Power
832x624 49.7kHz
Macintosh
1024x768 60.2kHz
series
- Recommended resolution is 1024 x 768.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh are reference
values.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer
'
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
No. Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 +5V
10 GND
11 N.C.
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
Specifications
Dot
Vsync
frequency
60Hz 25.175MHz
72Hz 31.5MHz
75Hz 31.5MHz
56Hz 36.0MHz
60Hz 40.0MHz
72Hz 50.0MHz
75Hz 49.5MHz
60Hz 65.0MHz
70Hz 75.0MHz
75Hz 78.75MHz
70Hz 28.3MHz
66.7Hz 30.2MHz
74.6Hz 57.3MHz
75Hz 80.0MHz
s instruction manual to set
Relevant signal timings (digital)
Display mode
640x480
VESA
800x600
1024x768
720x400
US text
- Recommended resolution is 1024 x 768.
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to
DVI (DVI-D24 pin or DVI-I29 pin) and with XGA
output capability can be connected here.
Depending on the type of computer to be
connected, the display may not work correctly.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
The DVI-D input connector pin
(DVI-D connector with 24 pins)
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
8 N.C.
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1 shield
12 N.C.
24
Dot
Hsync Vsync
frequency
31.5kHz 60Hz 25.175MHz
37.9kHz 72Hz 31.5MHz
37.5kHz 75Hz 31.5MHz
37.9kHz 60Hz 40.0MHz
48.1kHz 72Hz 50.0MHz
46.9kHz 75Hz 49.5MHz
48.4kHz 60Hz 65.0MHz
56.5kHz 70Hz 75.0MHz
60.0kHz 75Hz 78.75MHz
31.5kHz 70Hz 28.3MHz
No. Function
13 N.C.
14 +5V
15 GND
16 Hot plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock +
24 TMDS clock -