Rockinger RO 50 Série Instructions De Montage Et D'utilisation page 25

3 3 . . M M a a i i n n t t e e n n a a n n c c e e
Fig. 10
Fig. 11
H
ROCKINGER
26
Member of JOST-World
Lower bush:
Check wear using ROCKINGER reference gauge (order no. 57334).
Max. admissible internal diameter of lower bush is 35.9 mm.
Passage below pin must be free.
In case of nonobservance there is a risk of accident,
!
because the coupling bolt can not come into its secured
position.
Please consult repair leaflet (available on request) for details of repla-
cing.
Support ring:
Support ring for drawbar eye (H) must be replaced if drawbar eye
could touch lower bush because of wear (see fig. 11).
Lower bush must not be damaged under any circum-
stances as this will impair closure of coupling.
!
Take care to prevent risk of accident!
Always grease support ring to reduce wear (please consult repair
leaflet, available on request, for details of replacing).
R R O O 5 5 0 0
i i