Before Mounting - Rockinger RO 50 Série Instructions De Montage Et D'utilisation

1 1 . . M M o o u u n n t t i i n n g g
ROCKINGER
20
Member of JOST-World

1.1 Before Mounting

Note: Please comply with following when fitting hitch:
– applicable national regulations
– vehicle manufacturers specifications
– clearance for axial rotation of oupling head of at least e 25h min.
Fig. 1:
x Unscrew 3
x Remove 4, 5, 6 and 7 (8 remain on 9)
Note:
x 1 and 2 are in the equipment pack
Do not remove the copper grease and the special grease from
the parts.
1.2 Mounting
x Install the bearing (6) onto the inner side of the cross member (T)
x Secure with 4 hexagon bolts with flange M 20 x1.5, grade 10.9
and 4 hexagon bolts with flange, grade 10.
Bolts, nuts and torque to be chosen, see table (Order no. 71122
or 71760)
Note: Observe manufactures' instructions in case different bolts
and nuts are recommended!
ATTENTION:
Mount bolt heads on the side directed towards the funnel (outside
the cross member) to avoid impairing movability of the hitch
(see Fig. 2)
R R O O 5 5 0 0
i i