Warning Against Hazardous Operations - Tractel magfor II Série Notice D'utilisation

WARNING AGAINST HAZARDOUS OPERATIONS

Never activate or deactivate the magnet lifter when thickness of the load doesn't

correspond to the minimum values specified on the « practical tables for capacity
reduction » or on the signalling plate.
 Never release the lever freely. Always maintain a grip on the lever to its initial position.
 Never remove the lever in active position.
Ensure the load is in a stable position before deactivating the magnet lifter.

 Never lift more than one plate at a time. Take particular care when lifting thin plates.
 Never leave a load unsupervised.
Temperature of the load or/ and atmosphere must be between –20 and +80°C. (-20 to

+250°C for magfor II HT)
 Never lift dangerous, explosive or radioactive loads.
 Never lift loads which have non-attached charges on top.
Never exceed weights or min / max dimensions specified in « technical specifications ».

 Never use a magnet lifter in aggressive, chemical or saline atmospheres.
 Never lift a load by installing the magnet lifter on the narrow or smallest side.
Never install the magnet lifter with its longitudinal side on longitudinal direction of the

load.
M 6053 M
rev 16 – 04/2021
GB
Page 26/96
www.tractel.com