SEVERIN KA 4826 Mode D'emploi page 20

it has not been modified, repaired or
interfered with by any unauthorised person,
or damaged through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as
glass and ceramic items, bulbs etc. This
guarantee does not affect your statutory
rights, nor any legal rights you may have
Trouble shooting
Problem
Functions cannot be
activated.
The appliance switches off
before brewing is complete;
residual water remains
inside the container.
No coffee comes out of the
swing-out filter.
Water overflow in swing-out
filter.
The coffee is too thin.
Should you be unable to solve the problem using the table, please contact our Customer
Service. The contact data can be found in the appendix to this manual.
20
as a consumer under applicable national
legislation governing the purchase of
goods. If the product fails to operate and
needs to be returned, pack it carefully,
enclosing your name and address and the
reason for return. If within the guarantee
period, please also provide the guarantee
card and proof of purchase.
Cause
Appliance is not plugged
in.
Socket is defective.
Descaling required.
The glass jug is
not properly placed
underneath the outlet.
Not enough water.
Grind level too fine.
Too little ground coffee
was used.
Paper filter inserted
incorrectly, or collapsed.
Models with aroma
selection switch:
Wrong switch position
.
Remedy
Connect appliance to mains.
Check the socket with a
different appliance.
Descale the appliance (see
Cleaning and care).
Check that the jug is properly
positioned on the hot-plate,
pushing the outlet valve up.
Replenish water.
Select coarser grind level.
Increase the amount.
Fold down the perforated
sides first before insertion.
Set switch to position .