SEVERIN KA 4826 Mode D'emploi page 18

6. Starting the brewing cycle:
Press the On/Off button once to turn on the
coffee maker. The red indicator light comes
on.
If the brewing cycle is to be started with
a delayed timer setting, press the PROG
button twice to verify that the timer has
been set to the desired time. Now press
the On/Off button twice. The blue indicator
light AUTO comes on. The coffee maker
automatically switches on at the pre-
programmed time.
7. Removing the jug:
Wait until all the water has passed through;
the jug can now be removed.
8. Keeping the coffee warm:
The coffee may be kept warm in the jug by
leaving it standing on the hot-plate, which
remains hot for about 35 minutes after
brewing is complete.
9. Interrupting the brewing/keeping-
warm cycle:
To interrupt the brewing cycle, or if the
keeping-warm function is not needed,
press the On/Off button
appliance off.
Models with aroma selection switch:
This appliance features a special aroma
function, allowing the user to choose
coffee with a normal strong flavour, or
alternatively a very mild coffee.
Turn the aroma selection switch to the
desired setting before the brewing cycle
is started:
for mild coffee
or
for normal coffee
18
twice to turn the
Recipes
Are you in the mood for some delicious
coffee specialities?
or under www.severin.de/Service/Rezepte
Cleaning and care
Descaling
∙ Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
∙ Any warranty claim will be null and
void if the appliance malfunctions
because of insufficient descaling.
∙ A lengthening of the brewing time,
increased noise during brewing or
residual water remaining in the container
indicate that descaling has become
necessary.
∙ An excessive build-up of lime deposits
is very difficult to remove, even when
strong descaling agents are used.
∙ After 100 brewing cycles, the display
shows Descale. The appliance needs
descaling as described below. Once
descaling is complete, the Descale
indicator goes out.
∙ Descaling must not be done right
away, but should be done soonest. The
Descale indicator may be cancelled by