Cleaning; Maintenance; Technical Support; Technical Data - Tetra AquaArt Explorer Line 30 Mode D'emploi

• Using a timer the day lighting could be turned
on and off automatically.

Cleaning

 Pull out the plugs of all the electrical devices
installed in the aquarium.
 Empty the tank.
ATTENTION!
Incorrect cleaning may damage the
aquarium or poison the tank contents.
 Never use any hard, pointed or sharp
objects for cleaning purposes.
 Use soft cloths or sponges.
 Use only clean water or special
aquarium cleaning products for cleaning
purposes. These are available from your
stockist.
 Particularly the corners of the tank must
be cleaned carefully to prevent damage
to the glued joints of the glass walls.
 Clean the aquarium carefully.

Maintenance

 Pull out the plugs of all the electrical devices
installed in the aquarium.
CAUTION
Shards of glass can cause cuts.
 Ensure that you do not break the tank.
 Do not touch the shards of glass if the
tank breaks.
 Wear gloves.
 Remove all shards of glass carefully.
 Carry out maintenance work on the electrical
devices in the aquarium as described in the
attached instructions.
English translation of the original German
LED light
 Clean the LED light with a dry or slightly moist
cloth if it gets dirty.
 The light source is not replaceable. When it
reaches its end of life, the LED light must be
replaced.

Technical support

Please contact your local stockist or the Tetra
Technik Service Center in the event of faults.

Technical data

AquaArt 30 l
Explorer Goldfish
Line
Volume 30 l
Net weight 6.9 kg
of tank
Gross weight 37 kg
(with water)
Dimensions L: 28 cm
B: 41 cm
H: 51 cm
Tetra Filter 250 Filter 250 FilterBox
EasyCrystal
Heating –
element
LED light
Voltage
Power Day 4 W
lighting
Power Night 1.5 W
lighting
Protection II
class
Protection IP X7
rating
instructions
30 l 60 l
Crayfish
30 l 60 l
6.9 kg 13 kg
37 kg 73 kg
L: 28 cm L: 36 cm
B: 41 cm B: 51 cm
H: 51 cm H: 61 cm
300
– Tetra
HT50
220 - 240 V ~ 50/60 Hz
4 W 6 W
1.5 W 1.5 W
II II
IP X7 IP X7
9