Maintenance; Maintenance Table - Airpress EURO Série Manuel D'instructions

6.0 MAINTENANCE

Before carrying out any maintenance jobs it is obligatory to stop the machine
and disconnect it from the power mains.
1. Regularly drain condensation water. The drain tap (K) is situated at the bottom of
the tank. Draining with pressure in the tank is the easiest way.
2. The air filter element (L) should be cleaned or changed regularly. This change
depends on the amount of fouling and should be done more often in dusty
situations and less often in a clean situation. For cleaning the filter element, take
out the filter container with the filter. Then clean the filter by blowing off the dust.
Note: Regular maintenance of your compressor will increase durability and
reliability.

MAINTENANCE TABLE

works
draining
condensation water
clean
air filter
After use shut down the compressor by pushing the button on the
automatic pressure switch and then pull the plug from the power
supply.
weekly monthly
▀
▀
18