Airpress EURO Série Manuel D'instructions page 16

ENGLISH
TABLE OF CONTENTS
1.0 Prefatory note
2.0 Safety instructions
3.0 Placing
3.1 Electric connection
3.2 Air connection
4.0 First use
5.0 Operation
6.0 Maintenance
7.0 Possibilities of failure
8.0 Technical details
LEGENDA Fig. 1 (subject to modification)
A manual pressure switch
B
C push bow
D quick coupling
E safety valve
F bonnet for engine and fan
G non return valve (under bonnet)
H
I plug for extra connection
J pressure gauge for pressure of air
K drain tap for condensation water
L air filter
M discharge line
N pressure pipe (under the engine cover)
ATTENTION
To be able to use this compressor installation properly, a number of measurements
must be taken. The following points will contribute to making you a satisfied user of
this installation.
1.0 PREFATORY NOTES
Buying this compressor installation, you have become the owner of a compressor
installation with a high performance and reliability level. Correct use and regular
maintenance will increase the life of the compressor. n this manual you will find
operation and maintenance instructions. Read it carefully and keep it as a guide to
your compressor.
The compressor has been built to supply compressed air. In particular the appliance
cannot be used to produce air to be breathed by humans or used on direct contact with
foodstuffs. The appliance must be used only for the purpose for which it was
specifically designed. All other uses are to be considered incorrect and therefore
page 14
page 15
page 16
page 16
page 17
page 17
page 17
page 18
page 19
page 19
14