BAT Screeny 110 Manuel D'utilisation Et D'entretien page 24

Screeny 110 Line
sensors, the user must adopt appropriate organisational measures to prevent the activation of the product
when maintenance operations are being performed in the area, such as windows or walls' cleaning.
• The product absolves risks as per legislation EN13561: risks of a mechanical, electrical and ergonomic nature.
• The user must inform the Reseller immediately if any faults/malfunctions should occur on safety devices or if
any other dangerous situation should occur.
•
For any doubt, consult the reseller BEFORE using the product.
•
Removing the safety devices installed on the structure is strictly forbidden (see Ch.Pt.9 "Optional", P. 32).
•
It can be opened and closed by pressing a switch and/or via a remote control: both of these must be located
OUT OF THE REACH OF CHILDREN.
•
All maintenance and cleaning operations, and work done on the facade, must be performed with the electrical
supply disconnected.
In case the product is not being used for a prolonged period of time, do protect exposed mechanical
parts (if there are any).
ALL MEASUREMENTS ARE GIVEN IN MILLIMETRES UNLESS OTHERWISE INDICATED.
Some figures could be of a general nature and not be referred to the product at issue.
24
Use and maintenance manual
Rev.09 09/09/2019