Exposure To The Sun - Silk-n Infinity H3102 Mode D'emploi

Pulsing is the best technique for treating specific spots or small areas.
Press the treatment surface against your skin. Work in rows (either
U
across or down as shown in the image). Start at one end of each row and
EN
progress to the other end.
The treatment surface creates temporary pressure marks on the
U
treated area so you can see areas you have treated.
After each pulse, move the treatment surface to the next spot. Keep
U
doing this pulsing action for the area you are treating.
U
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for treating larger parts of the body.
Press the treatment surface firmly against your skin and slowly glide
over your skin (either across or down as shown in the image). Make sure
that the treatment surface is always touching your skin.
U At lower energy levels, the device takes only 1-1.5 seconds to recharge
between pulses. This generates a nonstop sequence of flashes.
U Glide at a speed so that you avoid gaps or overlaps.
C
Do not treat the same area of skin more than once per hair removal
session.
C
Stop use immediately if you have any pain.

4.5 Exposure to the sun

U Sun exposure includes constant unprotected exposure to direct
sunlight for over 15 minutes, or constant unprotected exposure to
diffuse sunlight for over 1 hour.
U Do not use on tanned skin after recent sun exposure, including tanning
machines. Using the device on skin that has been recently exposed to
sunlight can result in adverse effects such as burns, blisters, and skin color
changes (hyper- or hypo-pigmentation).
16