KERN FKTF 3K0.5LM Mode D'emploi page 50

After the first measurement object
has been placed it will be con-
firmed with TAKE GROS. The bal-
ance jumps automatically to the
second target.
At any time you can stop
the measurement with QUIT
MEAS.
OK = measured value is within the
tolerance (between TU and TO)
+ = passed the upper limit (TO)
- = below the lower limit (TU)
After the last measurement object
the scale displays "Ready" and the
series of measurements can be
printed with PRNT END.
By pressing, the scale also jumps
back to the start screen.
The measured values are stored
for the daily and weekly statistics,
if they are activated under MENU /
Configuration / Setting control
mode / Statistic.
22 FKTF-BA-e-1613