KERN FKTF 3K0.5LM Mode D'emploi page 45

Caution:
The automatic limit value calculation is active if under MENU / Configuration /
Setting control mode / Tolerance the "tolerance" is set to automatically and the
verification switch is active. After entering a setpoint the ohter limits are auto-
matically calculated according to the statutory FPVO regulation.
Generally:
FKTF-BA-e-1613
Here, the tolerance data as set-
point, upper limit, lower limit, lower
limit 1 and lower limit 2 can be en-
tered.
Under "Quantity", the number of
the tested measurement objects
can be entered.
The arrow key can be used to
scroll to the previous page or to
the next page.
On page 3 of the item you will get
insight into the respective daily and
weekly statistics. If desired, these can
be printed.
Caution:
The daily and weekly statistics are
only visible if you have been activat-
ed under MENU / Configuration / Set-
ting control mode / Statistic.
With "Manual tare" you can enter the
desired automatic tare value.
By clicking the "HOME" button you
get back to the start-up screen.
The "back arrow" key allows one
page back.
With "CLR" all product data will be
deleted.
17