Installing The Lamp Housing Mount And Mirror Housing) - Leica Microsystems DMI3000 B Mode D'emploi

6. Assembly
Fig. 51
Inserting
lamp with
cover
a right
b wrong
a
b
Fig. 52 Rear view, Leica DMI4000 B and DMI6000 B
1 Installation point for lamp housing mount
or mirror housing
2 Holes for lamp housing mount or mirror housing screws
2
46
2
1
6.11 Installing the Lamp Housing Mount and
Mirror Housing (Leica DMI4000 B and
DMI6000 B)
Place lamp housing mount (Fig. 53) or mirror
housing on rear wall. Mount from front with sock-
et head screws.
Fig. 53 Lamp housing mount
Next, attach the appropriate connector(s) (right,
left, straight) to the lamp housing mount. The
lamp housing or coupling is then mounted on the
connector, which is also held by four screws.
Fig. 54 Lamp housing 106z
1 Collector adjustment
2 Vertical lamp adjustment
3 Horizontal lamp adjustment
4 Adapter ring
4
2
3
1