Installation Of Specimen Stages - Leica Microsystems DMI3000 B Mode D'emploi

6.4 Installation of Specimen Stages

A wide range of specimen stages are available.
The most important are the following:
• Fixed stage (248 mm x 204 mm) (Fig. 13):
normal, heating and temperature-controlled,
with and without attachable mechanical stage
• Fixed micromanipulation stage (248 mm x
204/112 mm) (Fig. 15): normal, heating, and
temperature-controlled, with and without at-
tachable mechanical stage
• Standard manual (Fig. 14) and motorized
3-plate cross-stage, positioning range: 83 mm
x 127 mm
• Manual (Fig. 15) and motorized micromanipu-
lation 3-plate cross-stage
positioning range: 40 mm x 40 mm
• manual rotating stage
• scanning stage 120 x 100
(motors on bottom)
Fig. 13 Fixed stage (normal)
Fig. 14 Mechanical 3-plate stage
Fig. 15 Micromanipulation stage with attachable
mechanical stage
Fig. 16 3-plate micromanipulation stage
6. Assembly
33