Setup/Config-Module - ELSA LANCOM Wireless L-2 Manuel De L'utilisateur

R36 Description of the menu options
– unkn.: While verifying uniqueness, it was determined that the address has
– stat.: A computer has informed the DHCP server that it has a fixed IP address.
– dyn.: The DHCP server assigned an address to the computer.

Setup/Config-module

This menu allows you to enter settings for router configuration options. The menu has
the following layout:
/Config-module
LAN-config
WAN-config
Password-required
Farconfig-(EAZ-MSN)
Config-aging-minute(s)
Login-errors
Lock-minutes
Language
LAN-config This option allows you to define whether remote configuration from the LAN side is
possible (On), is not possible (Off), or is possible only in read mode (Read). The default
setting for this option is On.
WAN-config This option allows you to define whether remote configuration from the WAN side is
possible (On), is not possible (Off), or is possible only in read mode (Read). The default
setting for this option is Off.
Password- This specifies whether a new password should be requested every time a remote
required
configuration is begun (On), or the password request should be suppressed (Off). The
default setting for this option is Off.
Farconfig-(EAZ- This subscriber number permits remote configuration via PPP. If no number is specified
MSN)
here, remote-configuration calls will be accepted on all numbers.
Config-aging- If data transmission halts during a remote configuration session, e.g. because the user is
minute(s)
no longer entering data, the device automatically releases the connection at the end of
the time period specified here. Possible settings are from 1 to 99 minutes; The default
setting is 15 minutes.
ELSA LANCOM Wireless
already been assigned to another computer. Unfortunately, the DHCP server has
no means of obtaining additional information on this computer.
This address can no longer be used.
Configuration module settings
Switch for configuring from the LAN side
Switch for configuring from the WAN side
Password required on/off if there is no password
Subscriber number for remote configuration via PPP
Time limit for remote configuration connections
Number for failed log-in attempts before the log-in block is
activated
Duration of block and period until old log-in errors are for-
gotten.
Configuration language