Setup/Dhcp-Server-Module - ELSA LANCOM Wireless L-2 Manuel De L'utilisateur

R34 Description of the menu options
This entry indicates, for example, that an ELSA LANmonitor has logged on to the router.

Setup/DHCP-server-module

This menu allows you to enter settings for the DHCP server. The menu has the following
layout:
/DHCP-server-module
State
Start-address-pool
End-address-pool
Netmask
Broadcast-address
Max.-lease-time-minute(s)
Default-lease-time-minute(s)
Table-DHCP
State On: The device operates as a DHCP server
Off: The device does not operate as a DHCP server
Auto: The device regularly checks whether there is another DHCP server in the LAN. If
not, it operates as a DHCP server and issues IP addresses to local clients.
If there is no IP or Intranet address entered in the TCP/IP module (e.g. delivery status),
the router will issue IP addresses from the address range 10.0.0.2 - 10.0.0.253 to all
DHCP clients in auto mode.
Start-address- The IP address assigned is taken from the address pool selected ('Start-address-pool' to
pool
'End-address-pool'). Any valid addresses in the local network can be entered here.
End-address-
If 0.0.0.0 is entered instead, the device will determine the appropriate addresses (start
pool
or end) from the settings under 'Setup/TCP module'. The procedure is as follows:
If only the IP address or only the Intranet address is entered, the start or end of the
pool is determined by means of the associated network mask.
If both addresses have been specified, the Intranet address has priority for
determining the pool.
The start address of the pool is either the address given in the DHCP module or the
first valid address in the local network.
The end address of the pool is either the address given in the DHCP module or the
last valid address in the local network.
ELSA LANCOM Wireless
DHCP server settings
Switch for activating the DHCP module
Start address for the address pool
End address for the address pool
Network mask for the address pool
Broadcast address for the LAN
Maximum period of validity for the address assignment
via DHCP
Default period of validity for the address assignment via
DHCP
Table of current assignments via DHCP