Status/Wlan-Statistics - ELSA LANCOM Wireless L-2 Manuel De L'utilisateur

R20 Description of the menu options

Status/WLAN-statistics

The current status of the WLAN interface is described here.
LAN-rx-packets
LAN-tx-packets
LAN-rx-errors
LAN-tx-errors
LAN-stack-errors
LAN-queue-packets
LAN-queue-errors
LAN-rx-bytes
LAN-tx-bytes
LAN-rx-broadcasts
LAN-rx-multicasts
LAN-rx-unicasts
LAN-Tx-broadcasts
LAN-Tx-multicasts
LAN-Tx-unicasts
LAN-repeats
LAN-multiple-repeats
BSSID
Phy-channel
LAN-Ready
Station table
Station table
This table displays information on the individual mobile stations:
Age
Phy-signal
Node ID
ELSA LANCOM Wireless
Number of data packets received
Number of data packets sent
Number of data packets incorrectly received
Number of data packets incorrectly sent
Number of packets without a suitable receive module (bridge/
router)
Number of buffers in use
Number of packets discarded due to a lack of buffers
Number of bytes received from the LAN
Number of bytes sent to the LAN
Number of broadcast packets received from the LAN
Number of multicast packets received from the LAN
Number of directly addressed packets received from the LAN
Number of broadcasts received from the WAN
Number of multicasts received from the WAN
Number of unicasts received from the WAN
Number of packets that were repeated before being received
successfully
Number of packets that were repeated several times before
being received successfully
Numerical cell identifier; numerical translation of the WLAN
domain name. In infrastructure mode this is always identical
with the MAC address of the base station
The radio channel currently being used by the base port.
Successful initialization of the wireless network adapter.
Display of the mobile stations currently logged on.
Age of the station: Time since the last data packet was transferred.
Average signal strength of the data packets received from this station.
Address of the station. Depending on availability, a MAC address, IP address or a
symbolic name if this station uses DHCP.