Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Status
The Status menu contains information on the current status and the internal sequences
of operations in the LAN and WAN, which can relate to the data transmission route (e.g.
dialing or connection) or to statistics (e.g. number of calls received or data blocks
transmitted). The statistics displays are an important aid for verifying correct functioning
and optimizing parameter settings. In addition, they provide valuable information for
error analysis when malfunctions occur.
Most status displays are continually updated and can be deleted with a value or set to
0 in the current menu.
The menu has the following layout:
Status
Current-time
Operating-time
LAN-statistics
TCP-IP-statistics
Config-statistics
Queue-statistics
Delete-values
Status/Current-time
This displays the current device time, used, e.g., for the least-cost-router calculations or
certain statistics. The time can be read from the ISDN (ISDN time, see also Setup/time
module) or set manually (with the 'time' command).
Status/Operating-time
The operating time of the router since it was last started is displayed here in days hours,
minutes and seconds.
Description of the menu options
Running status displays
Current time in device
Period of time the device has operated since it was last switched
on
Displays LAN statistics
Statistics from the TCP/IP area
Remote configuration statistics
Statistics relating to the packets in the queues of the individual
modules
Deletes all values except tables with substatistics.
ELSA LANCOM Wireless
R19
Publicité
Table des Matières
