Connecting The Power Cord - Seagate DAT Drive DDS Manuel D'installation

A-18 Seagate DAT Drive Installation Manual—English
Figure 8
SCSI termination examples
External SCSI device
(termination enabled)
External SCSI device
SCSI Controller
(termination enabled)
Example 1: SCSI termination
in a system that has only
external SCSI devices.

Connecting the power cord

Attach the power cord securely to the power connector on the
back of the drive. The location of the power connector is
shown in Figure 7 (on the previous page).
External SCSI device
(termination enabled)
External SCSI device
SCSI Controller
Internal SCSI device
Internal SCSI device
(termination enabled)
Example 2: SCSI termination
in a system that has both
internal and external SCSI devices.