Changing The Battery; Rectifying Faults; Help From Our Service Team - Schluter Systems LIPROTEC-EASY Mode D'emploi

LIPROTEC-P Operating Instructions
4. Within the first 5 seconds of establishing the voltage supply on the radio remote control,
press and hold the ON/OFF and DOWN at the same time for approx. 3 seconds »
> The status LED of the Bluetooth receiver flashes while the radio remote control is
being stored in the Bluetooth receiver.
5. Release the ON/OFF and DOWN buttons as soon as the status LED stops flashing on the
Bluetooth receiver.
> The radio remote control is now taught. The Bluetooth receiver can now be controlled
via the newly taught radio remote control.

5.5 Changing the battery

Replace an empty battery ( » "Technical data for the battery" on page 67 ) as shown »
6

Rectifying faults

6.1 Help from our Service team

Should you have any questions about operation or a technical matter, our Service team will
be happy to help:
Schlüter Service Team
Schlüter-Systems KG
Schmölestraße 7
58640 Iserlohn
GERMANY
Tel.: +49 2371 971-240
Fax: +49 2371 971-339
www.liprotec.de/anwendungstechnik.aspx
EN
17
.
18
.
61