Sony VSP-BZ10 Manuel D'installation page 23

Rear
a Cable tie holder attachment hole
Attach the cable tie holder here when you
want to secure the power cord, HDMI cable,
and other cables to the player. Attach a
commercially available cable tie as
illustrated, and secure it to the cable tie
holder.
Use a cable tie that is 1.9 mm or less in
thickness, and 3.8 mm or less in width.
b 12V connector
Connects to a power cord.
c REMOTE OUT connector
Connects to a display with RS-232C
interface via an RS-232C cable.
d LAN (10/100) (network) connector
(10BASE-T/100BASE-TX)
Connects the player to a network via a
10BASE-T/100BASE-TX LAN cable.
CAUTION
For safety, do not connect the connector for
peripheral device wiring that might have
excessive voltage to this port. Follow the
instructions for this port.
e AV OUT connector
Connects to a display via an HDMI cable.
f RGB OUT (analog) connector
Connects to a display via an RGB cable.
g AUDIO OUT connector
Connects to audio equipment via a stereo
mini plug cable.
h Security slot
Attach a commercially available security
cable here.
For details on how to use security cable,
refer to the operating instructions supplied
with the security cable.
Names and Functions of Parts and Controls
23